How to use fungicide in metal cutting fluid? Rough processing of steel parts usually set aside processing allowance, production processing is difficult to produce raw materials and rare metal raw materials, roughness precision index value is not high, therefore, production processing is difficult to produce raw materials and rare metal raw materials, rough processing of cutting fluid composition is not high, can be applied in water extreme pressure emulsion.

How to use fungicide better master the frequency of use: The number of fungicide spray is mainly determined by the length of the residual period and meteorological conditions. Generally spray once every 10 to 15 days, a total of 2 to 3 times. In case of special circumstances, such as rain after application, should be replenished once in time.

Industrial preservatives refer to substances that can prevent or inhibit the growth of microorganisms

Putrid pulp is mainly caused by microorganisms, including filamentous bacteria from water, algae, mold in the air and a large number of bacteria from waste paper. At the same time, a large number of chemical additives added to paper production, such as: Sizing agents, starches and fillers are rich in nutrients, providing rich nutrition for these microorganisms

Mildew is the common name for filamentous fungi, which means "moldy fungus". The mold structure can be divided into two main parts: mycelium and sporophyte.

When leather products are in the humid environment, it is very easy to be harmed by mold, so that the quality of leather is seriously affected. The breeding of mold on leather will multiply by taking the oil and leather fiber in the leather. The light will make the leather lose luster, and the heavy will cause the grain surface to be brittle and mildew. The physical and mechanical properties of the leather will be reduced and the service life of the leather products will be shortened

The main effective substance of the industrial preservative of dish soap is casson preservative, and the general product of dish soap industrial preservative is light yellow liquid. When you make dish soap in the factory, because dish soap industrial preservative is a liquid, you add it to the dish soap in the last process, you just stir it.

Factors affecting carbone preservative

Alkylammonium chloride (AAC) is the general name of the third and fourth ammonium salts. It is effective to A wide range of organisms, has little impact on the environment, and has good natural degradability. The appearance and processing properties of treated wood are similar to those of untreated wood, and it has great application potential.

Mold is a kind of fungus, its characteristic is mycelium is more developed, there is no larger fruiting body. Like other fungi, there are cell walls, parasitic or saprophytic survival. Some molds can transform food into toxic substances, and some may produce toxins in food, namely mycotoxins. Since the discovery of aflatoxin, the contamination of food by mold and mycotoxin has been paid more and more attention. It causes great harm to human health, mainly manifested as chronic poisoning, carcinogenesis, teratogenesis and mutagenesis.