Product News

  • What is heavy duty anti-corrosion coating? What are the characteristics of water-based heavy-duty anti-corrosion coatings?

    What is heavy duty anti-corrosion coating? What are the characteristics of water-based heavy-duty anti-corrosion coatings?

    23-05-2022
  • What are the special features of dry film antifungal agent?

    Dry film antifungal agent is a kind of product that has a broad antibacterial spectrum, especially has a strong inhibitory effect on mold and yeast

    20-05-2022
  • Safety requirements for transport of mildew inhibitor

    Dangerous goods transport vehicles usually transport dangerous goods with corrosive, natural, flammable, toxic, explosive and other properties. Dangerous goods have special physical and chemical properties. If they are not properly protected during transportation, accidents are likely to occur , and the consequences of the accident are more serious than ordinary vehicle accidents. Therefore, in order to ensure safety, the following eight points should be paid attention to in dangerous transportation:

    16-05-2022
  • Formaldehyde emission grading and indoor bearing limit guidelines for wood-based panels are released as national standards

    According to the standard announcement (No. 3 of 2021) issued by the State Administration of Market Supervision and the National Standards Committee on March 9, GB/T 39600-2021 "Grading of Formaldehyde Emissions from Wood-based Panels and Their Products" is under the centralized management of the National Wood-based Panel Standardization Technical Committee. " and GB/T 39598-2021 "Guidelines for Indoor Bearing Limits of Wood-based Panels Based on Limit Formaldehyde Content" were officially released and will be implemented on October 1, 2021.

    13-05-2022
  • Analyze the correct use of antifungal agents

    How should mold inhibitors be used? The correct use method of the antifungal agent, the addition method or the transfer method, is to directly add a certain proportion of the antifungal agent to the material or product. It can be added at the same time as the raw materials, or at a certain link in the middle, or even in the finished product. Powders can be added, or medicaments pre-dissolved in water or other organic solvents can be added.

    11-05-2022
  • Introduction of environmentally friendly daily chemical preservatives

    Environmentally friendly daily chemical preservative This product is suitable for water-based products in the storage period of the tank to protect the anti-corrosion fungicide, and is more suitable for products with a value between 4-9.5.0

    09-05-2022
  • If the coating wants to have a long shelf life, it is inseparable from kathon

    In our daily life, paint has been closely related to us. It is mainly used on the surface of walls and some furniture, which can play the role of protection and decoration. But have you ever had the phenomenon of paint mold? Gray or brown molds are often seen, which not only affects the appearance, but also easily breeds bacteria, causing adverse effects on human health. To deal with this phenomenon, Kazon fungicide is generally used.

    07-05-2022
  • What is the use of concentrated antifungal agents?

    In daily life, it is often seen that wooden products are moldy, black spots, rotten, fragile, etc. This is caused by insufficient anti-corrosion and mildew-proof measures for wooden products. This can be avoided by using a concentrated mildew inhibitor.

    05-05-2022
  • Advantages of kathon in Anticorrosion of Detergents

    The main effective substance of the detergent industrial preservative is the carson preservative, and the general finished detergent industrial preservative is a light yellow liquid. When the detergent is produced in the factory, because the industrial preservative of the detergent is a liquid, it is added to the detergent in the last process, and it is enough to stir and mix well.

    26-04-2022
  • Waste Liquid Treatment of BRPG Series In Vitro Diagnostic Reagent Bacteriostatic Agents

    A large amount of acidified sodium metasulfite or sodium bisulfite can be added to the waste liquid or splash of BRPG series in vitro diagnostic reagent bacteriostatic agents, these chemicals can easily neutralize the active components in BRPG series in vitro diagnostic reagent bacteriostatic agents deactivate it

    24-04-2022
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy