Safety requirements for transport of mildew inhibitor
Dangerous goods transport vehicles usually transport dangerous goods with corrosive, natural, flammable, toxic, explosive and other properties. Dangerous goods have special physical and chemical properties. If they are not properly protected during transportation, accidents are likely to occur , and the consequences of the accident are more serious than ordinary vehicle accidents. Therefore, in order to ensure safety, the following eight points should be paid attention to in dangerous transportation:
Dangerous Goods Transporter Dangerous Goods Transporter
1. Pay attention to packaging Dangerous goods should be packaged in a safe way according to their nature, transportation distance, and road conditions along the way before shipment. The packaging must be firm and tight, with clear, standardized and easily identifiable signs on the packaging.
2. Pay attention to loading and unloading Roads, lights, signs, fire-fighting facilities, etc. at the loading and unloading site of dangerous goods must meet the conditions for safe loading and unloading. When loading and unloading dangerous goods, the car should be parked in the open air, and the loading and unloading workers should pay attention to their own protection and wear necessary protective equipment. Strictly abide by the operating rules, light loading and light unloading, it is strictly forbidden to drop, bump, roll, press and invert. The goods that are afraid of damp should be covered with tarpaulins. The goods must be stacked neatly and bundled firmly. Dangerous goods of different nature cannot be mixed in the same car, such as detonators, explosives, etc.
3. Note that suitable vehicles must be used to transport dangerous goods by vehicle. Explosives, primary oxidants and organic oxides shall not be transported by fully-trailed car trains, tricycles, motorcycles, human tricycles and bicycles; explosives, primary Oxidants, organic peroxides, and first-class flammables shall not be transported by tractors. Except for Class II fixed dangerous goods, other dangerous goods shall not be transported by dump trucks.
4. Pay attention to fire prevention. Dangerous goods should be transported without fire. Dangerous goods should be loaded and unloaded with tools that do not produce sparks. Smoking is strictly prohibited in the compartment. The ground wire should be installed when the oil tanker transporting petroleum is stopped and loaded and unloaded. When driving, the ground wire should be grounded to prevent static electricity from causing fire.
5. Pay attention to driving Vehicles transporting dangerous goods shall be provided with signs stipulated in GB13392-92 "Signs of Vehicles for Road Transport of Dangerous Goods". Vehicle operation must strictly abide by traffic, fire, public security and other laws and regulations, should control the speed of the vehicle, keep the distance from the vehicle in front, slow down in advance in case of situations, avoid emergency braking, and strictly prohibit illegal overtaking to ensure driving safety.
6. Pay attention to leakage When dangerous goods are leaked during the shipping process, they should be properly handled according to the different properties of the dangerous goods. When the explosives are scattered, they should be moved to a safe place, repaired or replaced, and the leaked explosives should be soaked with water in time, and the local public security firefighters should be asked to deal with them; when the tanks storing compressed gas or liquefied gas leak, they should be Move it to a ventilated site, and water the leaking cylinder to cool it down; when the liquid ammonia leaks, it can be immersed in water. Other highly toxic gases should be immersed in lime water. When flammable solid objects are scattered, the scattered packaging should be quickly moved to a safe place. Immediately after the yellow phosphorus is scattered, it should be immersed in water. Metal sodium, potassium, etc. must be immersed in iron drums containing kerosene or anhydrous liquid paraffin; flammable liquids In case of leakage, the leakage part should be turned upward in time, and it should be moved to a safe and ventilated place to repair or replace the packaging. The leakage should be covered with yellow sand and dry soil and then cleaned up.
7. Note that vehicles loaded with dangerous goods shall not be parked in schools, institutions, markets, scenic spots and scenic spots. If loading and unloading operations or temporary parking must be carried out in the above-mentioned areas, safety measures shall be taken, and the local public security department shall be consulted. consent. When parking, keep someone to guard the car, and the idle personnel are not allowed to approach the vehicle, so that the car is in the presence of people to ensure the safety of the vehicle.
8. Pay attention to cleaning the car. After the dangerous goods are unloaded, the residues on the vehicle should be cleaned. Vehicles and tools that have been contaminated by dangerous goods must be washed and detoxified. Without thorough detoxification, it is strictly forbidden to ship edible, medicinal articles, feed, animals and plants.
During the transportation of dangerous goods vehicles, due to their own combustion, explosion, corrosion, poisoning and radioactivity, or due to the influence of external factors such as friction, vibration, impact, exposure, or temperature and humidity, it is easy to cause life-threatening and property losses. Accidents, dangerous goods transport vehicles in the transportation process, due to timely protection. Avoid man-made accidents.
