Analyze the correct use of mold inhibitors
How should antifungal agents be used? The correct use method of the antifungal agent, the addition method or the method called in, is to directly add a certain proportion of the antifungal agent to the material or product. It can be added at the same time as the raw materials, it can also be added at a certain point in the middle, or even in the finished product. Powders can be added, or agents that have been dissolved in advance with water or other organic solvents can be added.
How should antifungal agents be used? Proper use of mold inhibitors:
(1) Addition method
Or called the transfer method, which is to add a certain proportion of antifungal agent directly to the material or product. It can be added at the same time as the raw materials, it can also be added at a certain point in the middle, or even in the finished product. Powders can be added, or agents that have been dissolved in advance with water or other organic solvents can be added. Generally used in this method are: food, beverages, condiments, cosmetics, adhesives, oil coatings, metal rolling fluids, cutting oils, and so on.
(2) dipping method
The material or product is immersed in a certain concentration of the agent for a certain time, and then taken out to dry or dry, so that the surface and the inside of the material or product are adsorbed to the antifungal agent. Depending on the processing target, the time and temperature of immersion need to be grasped. Commonly used in this method are: string, cloth, carpet, packaging materials, bamboo and wood products, straw fabrics.
(3) coating method
Coating tools (brushes, pens, brushes, etc.) with a certain concentration of antifungal agent are applied to the surface of the material or product. The coating part is not only the outer surface, but also the inner surface. This method is usually used. There are: textiles, leather products, bamboo scrapers, electrical products, cloth shoes and so on.
(4) spray method
Spray a certain concentration of antifungal agent on the wheat flour of the material or product with a sprayer, preferably also on the inner surface. The spray must be uniform and the mist should not be too large. Generally used in this method are: leather and its products, cloth shoes and rubber shoes, textiles, bamboo and wood products, electrical products and various parts.
(5) fumigation method
The powder or tablet of the volatile agent is placed in the space of the product or container and allowed to volatilize, and a germicidal gas is gradually emitted and spread in the closed space to play a role of preventing mold. Commonly used this method are: optical instruments such as telescopes, microscopes and traditional Chinese medicine.
Whether to use the same method of use is mainly considered according to the performance and processing of the item and the occasion of use. It can be flexibly held without uniformity.
