-
What kinds of preservatives are there for cosmetics 1
Preservatives are agents that prevent the growth and reproduction of microorganisms and prevent decay.
23-01-2023 -
How to use fungicide better 2
How to use fungicide better master the frequency of use: The number of fungicide spray is mainly determined by the length of the residual period and meteorological conditions. Generally spray once every 10 to 15 days, a total of 2 to 3 times. In case of special circumstances, such as rain after application, should be replenished once in time.
17-01-2023 -
Industrial preservatives are substances that prevent or inhibit the growth of microorganisms
Industrial preservatives refer to substances that can prevent or inhibit the growth of microorganisms
13-01-2023 -
Application of anti-mildew agent
Putrid pulp is mainly caused by microorganisms, including filamentous bacteria from water, algae, mold in the air and a large number of bacteria from waste paper. At the same time, a large number of chemical additives added to paper production, such as: Sizing agents, starches and fillers are rich in nutrients, providing rich nutrition for these microorganisms
12-01-2023 -
Paper - making fungicide sterilization and improve the efficiency of paper production
Putrid pulp is mainly caused by microorganisms, including filamentous bacteria from water, algae, mold in the air and a large number of bacteria from waste paper.
09-01-2023 -
How to prevent mold growth, and some of the characteristics of mold
Mildew is the common name for filamentous fungi, which means "moldy fungus". The mold structure can be divided into two main parts: mycelium and sporophyte.
06-01-2023 -
Benefits of wood fungicides applied in summer
There are many kinds of industrial fungicides, including industrial anti-mildew agent, industrial preservatives, water treatment agent bactericidal algaecide, wood building materials preservatives anti-mildew and other varieties.
12-12-2022 -
Can leather mildew - proof agent be both mildew - proof and antibacterial?
When leather products are in the humid environment, it is very easy to be harmed by mold, so that the quality of leather is seriously affected. The breeding of mold on leather will multiply by taking the oil and leather fiber in the leather. The light will make the leather lose luster, and the heavy will cause the grain surface to be brittle and mildew. The physical and mechanical properties of the leather will be reduced and the service life of the leather products will be shortened
07-12-2022 -
Selection of antiseptic and mildew agent for coating
The following points must be considered in the selection of coating antiseptic and mildew agent:
06-12-2022
